While BAK says it is possible to take their covers through a car wash as long as the cover is closed and secure, there are some important things to keep in mind that might help you to protect your investment while simultaneously enjoying the convenience of an automatic wash for your truck.
Car washes with spinning brushes should be avoided while the Tonneau cover is on. You don't want it to be damaged by the abrasions that might occur from a rolling brush that's simply too abrasive for... view full answer...
My contact at WeatherTech advised that in general it is best to avoid the fully automatic brush-type car washes that make contact with their bug deflectors. The nature of automated car wash facilities varies quite a bit (there are no-touch types, large rotary brush types and also the hanging-strip type) and so it is tough to make a blanket statement.
Their Bug Shield # WT50152 that fits your 2011 Chevrolet Tahoe can be installed in two ways, with either 3M automotive tape or under-the-hood... view full answer...
I'm sorry to hear about what happened to your Camco RV Wash Brush. Unfortunately, the brush portion by itself is not available as a separate item, which means you will need to replace the entire Camco Adjustable Flow Through RV Wash Brush # CAM41960.
The Camco brush is adjustable from 47" to 74" but if you don't need quite as much length, another option to consider is the SM Arnold Bi-Level Vehicle Cleaning Brush with Telescoping Flow-Thru Handle - 10" Cleaning Head # 38125-670.
The SM... view full answer...
I called my contact at Weathertech and they told me the WeatherTech Mud Flaps, part # WT110002-120002 will be no problem for you.
They told me they have had zero complaints about the mud flaps holding up when going through a car wash as you described. view full answer...
The Air Lift WirelessONE Compressor System # AL25980 is designed to be able to withstand occasional contact with water but should not be in an area that will receive a lot of water exposure. If it is in an area where any jets from the car wash could directly hit then this will increase the risk of it becoming damaged from water. If unsure you can always place a plastic bag over the compressor while going through the car wash to ensure water does not get into the compressor. view full answer...
While the K-Source Snap & Zap Custom Towing Mirrors # KS69NQ for your 2021 Ford F-150 have a secure fit and would likely be ok going through a car wash with the mirrors folded in, we recommend that you remove the mirrors. We do not recommend going through a car wash with anything that is not permanently attached left on. The Snap & Zap mirrors do have a quick tool free installation and removal so you would be able to remove the mirrors and have them back on in seconds. view full answer...
With all the nooks and crannies in a roof basket, like your Stallion # 288-09200, I strongly suggest not going through a mechanized car wash. However, there will be no issue going through a no touch style one as there is nothing that could get caught on the basket. If this is not an option though, you will need to remove the basket, unfortunately.
If you cannot get enough purchase on the knobs to loosen them, you might try using a crescent wrench. This sounds weird, but it may allow you... view full answer...
We have found in our own tests that the Weather Tech bug deflectors like the # WT50150 will hold up just fine in a carwash. For example, I just spoke with a coworker of mine who has a Weather Tech bug shield on his 2019 Toyota Highlander. It has been on there for about a year and has been thru the carwash many times. The shield will move slightly when the scrubbers go over the hood, but it is sturdy enough to make it thru with no issues.
There are small rubber bumpers that go on each end... view full answer...
According to the owner of GCH Automotive, the # 3460001 camera can be ran through a car wash. Just make sure the gaskets are installed properly. If they aren't installed properly, the camera can leak. It's also important that the mounting screws aren't overtightened. This will deform the plastic and can also cause warping. view full answer...
Both the of Baron & Baron Harley-Davidson hitch covers you referenced, part # HDHC14 & # HDHC25, share common construction features including chrome-plated-brass emblems, stainless-steel mounting posts and included locking bolts to secure them to your hitch.
Chrome and stainless are both naturally resistant to corrosion, to a point of course, but these items do not carry a formal salt spray rating like some trailer components do.
So what I suggest to ensure their lasting good looks is... view full answer...
Excellent questions, and the bottom mirrors are actually spotter mirrors and not convex for the K-Source mirrors that fit your 2018 Chevy Silverado 1500, which are the following part number:
- K-Source Custom Extendable Towing Mirrors - Electric/Heat # KS62147-48G
So what a spotter mirror means is that you will be able to manually adjust it in order to help you with any possible blind spots both when the mirrors are extended and not extended. This allows you the best possible view no... view full answer...
I have attached a photo of the back of the Ford Escape Trailer Hitch Receiver Cover, part # FOVHC-12.
As you can see in the photo, the faceplate is held in place on the sleeve with 4 screws and it would take quite a bit of excessive force from a car wash to knock the faceplate off. This hitch cover has a chrome-plated faceplate that is attached to a stainless steel base to help resist rust and corrosion. This cover also comes with three foam gaskets that makes sure the cover fits your... view full answer...
I spoke with TruXedo about how well the TruXedo Pro X15 Soft Tonneau Cover # TX1498301 holds up when going through the car wash and their tech stated as long as the tonneau cover is properly installed and maintained throughout its lifespan that you shouldn't see any damage from the carwash.
She did state that petroleum, citrus, silicone based chemicals can have a negative effect on the covers but would take a lot to really show any damage. view full answer...
The State of Texas Hitch Cover you mentioned, part # AMGSTTXC would be secured in the receiver using a standard hitch pin and retaining clip like # PC3 or a locking hitch pin like # e98882. Although some of the hitch covers we offer use the wire arrangement you describe, this particular cover uses a piece of square tubing attached to the rear of the cover as shown in the photo I provided.
Because hitch covers are frequently stolen, I would recommend going with the locking model. view full answer...
Road salt and other materials often don't mix well but the Firestone kits we sell are made with very durable natural rubber compounds that resist the negative effects of salt exposure as well as heat and cold. I completely understand your concerns, having attended college in upstate NY (Oswego) where the term 'winter' can take on a whole new meaning!
Firestone provides a Limited Lifetime Warranty on the actual rubber air springs in their kits, such as # F2709 which fits your truck so no... view full answer...
There is no tonneau cover made that is absolutely, positively 100-percent water tight under all circumstances and conditions. Water tends to find a place where it can flow and that will inevitably include even the tiniest gaps left after even the finest tonneau cover is installed correctly.
Anything that is rated to resist water - a wristwatch is a good example - is rated for a specific degree of resistance under specific conditions. A watch may be rated to handle the pressure equal to... view full answer...
A 6 foot 4 inch truck bed is commonly referred to as a 6-1/2 foot bed, so it's the same thing.
The Extang Solid Fold Hard Tonneau cover you'd looked at, part # EX83430 is a confirmed fit for your truck. The Extang Solid Fold tonneau does a great job of keeping the majority of the weather out, using thick rubber seals/gaskets and channels and drain hoses to route the water away from the interior but anyone who tells you their tonneau is 100% weatherproof is being disingenuous with you.... view full answer...
The truth of the matter is that tonneau covers are not 100% leakproof. Do most of them, especially the higher quality ones like the # BAK39133 BAK Revolver X2 do a very good job of keeping the vast majority of the water out? Absolutely. Will they keep all the water out, especially in a continuous hard rain? Possibly not. Anyone who tells you that their tonneau cover will never leak isn't being completely honest with you.
I've seen a $ 250.00 cover that you can drive through a car wash... view full answer...
Go To Results